[FrankJScott]

[center][/center]

[center][size=large]CLICK HERE FOR THE BEST SEX DOLL FEET ADVICE NOW[/size][/center]

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Nobody gives standing feet an idea until the day they need them, and that's when the enormous difference becomes obvious. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. To steer clear of a frustrating purchase, grasp the difference before you order; it's one of the simplest ways.

What Makes a Foot a Standing Foot
The basic difference is uncomplicated. Standing feet come with metal bolts embedded in the soles, and these permit the doll to stand upright without support. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and trying to stand her will damage the feet. Whether the bolts are present decides everything else; they're the key.

What Non-Standing Feet Can't Do
You need standing feet for photography and display. A doll that can stand unaided can be photographed in full-length poses without evident supports, and can be displayed in a corner, a doorway, or anywhere else that requires her to be upright. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the chief reason most photographers specify standing feet when ordering.

Structural Failure From Water Damage
Showering is another case where standing feet are essential. Showering with your doll requires her to stand; the alternative, lying her down in a shower, is both impractical and hazardous. The feet don't absorb water the way non-standing feet would, because the metal bolts ensure that, and the standing feet give her stability in a wet environment. This is a genuine safety consideration; water absorption in non-standing feet can lead to rust and eventual structural failure.

Foam or Filler Inside the Ankle
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. Foam or filler material absorbs water when it gets wet, and non-standing feet have that material inside the ankle. It then rusts the metal skeleton inside the leg, which takes weeks or months to show, and once it's started it's fundamentally unfixable. Because the water will find its way in irrespective of your precautions, a doll with non-standing feet should never be in the shower, no matter how cautious you are.

Storing Her Standing Up
In some setups, a doll with standing feet is also easier to store. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient alternative, and for anyone who wants to display the doll rather than keep her hidden it's a great one. With the standing feet, the doll can be stored clearly and accessibly, which some customers prefer.

The Extra Cost Explained
The disadvantage of standing feet is that they're slightly more costly and somewhat heavier. The metal bolts add a small amount of weight to the doll, and the manufacturing process is more involved, so the cost is usually a few percent higher than a doll with non-standing feet. Ordinarily worth the extra cost, and small, the difference is still worth knowing about on a very tight budget.

Solving the Visible Bolt Problem
Another downside is that the bolts can become apparent if the feet are bare. Photos of a doll in high-heeled shoes or open-toed footwear might show the bolts, which some purchasers find distracting. The trivial aesthetic issue goes away with closed shoes or footwear that hides the bolts, which means it's not a reason to avoid standing feet completely.

The Case for Non-Standing Feet
Non-standing feet are cheaper and lighter, and they're fine for purchasers who only want to use the doll in bed and don't plan to display her standing or shower with her. A doll that lives largely in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. Nothing mistaken with this choice for customers who know what they want; it's entirely valid.

What Non-Standing Feet Feel Like
Non-standing feet are a little softer and more flexible, and some customers find them more comfortable to touch as a result. A subtle difference, not ordinarily enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.

The Big Risk With Non-Standing Feet
Buyers sometimes forget what kind of feet they have and try to stand the doll anyway, which is the sizable risk with non-standing feet. Why is this typical mistake so damaging? The foam inside the ankle can't support the doll's weight, and it'll tear or collapse. What results is a doll that can't stand any more even with support, as the feet have been permanently damaged. When you purchase non-standing feet, remember what they are and don't be tempted to test their limits.

New Hardware Rarely Works as Well
Can standing feet be retrofitted to a doll that doesn't have them? That's a question too. In short, no, not readily. During manufacturing the bolts are embedded in the soles; doing it afterwards means cutting into the feet and installing new hardware, which is expensive and regularly doesn't work as well as the original. When you think you might want standing feet later and you're considering a doll without them, it's better to purchase a doll with standing feet first than attempt to add them later.

Worth the Small Extra Cost
If you're picking between standing and non-standing feet, the useful advice is simple. For photographing the doll, displaying her standing, or using her in the shower, you need standing feet. If you only want to use her in bed or on a sofa, and you don't care about display, non-standing feet are perfectly sufficient. Not sure? Choose standing feet: nothing is off the table with them, and the small additional cost is worth paying.

Pressure on the Body When Lying Down
It's worth mentioning a gender consideration too. Because male dolls are heavier and more hard to store in any other way, they usually get more from standing feet than female dolls do. Storage lying down, which puts pressure on the body and requires more space, is the only option for a 45kg male doll that can't stand. Customers who don't have a lot of room get a genuine upside from standing feet, which give male dolls the ability to store upright.

What Barefoot Photos Reveal
One final note: the aesthetic difference between standing and non-standing feet. The bolts make standing feet slightly harder at the bottom, and this can be visible when the doll is barefoot. The look of the hard soles is a little industrial, and some purchasers find that less aesthetically satisfying, especially on dolls with delicate features. Softness and a natural look are what non-standing feet offer, and some buyers prefer them. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.

A Quick Routine Check
There's also a maintenance angle that's worth considering. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out entirely can make the doll collapse. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the appropriate tool. Over the long run, non-standing feet need somewhat less maintenance, because they don't have hardware that can come loose.

A Small Mat or Grippy Pad
Standing on distinct surfaces is also influenced by the bolts. The doll is steady on carpet, where the bolts grip well. Extra support to stay upright may be needed on hard flooring, as the bolts can slip, particularly on a silky floor. Sliding on a hard surface? A small mat or grippy pad under the feet prevents it. This is worth knowing about if you plan to display a doll with standing feet on a hard floor. Non-standing feet don't have the issue, because the doll isn't standing in the first place.

Bolts Add a Little Length to the Foot
The doll's overall proportions are impacted by standing feet, a final consideration that's regularly overlooked. The foot gets a small amount of additional length from the bolts, and that can marginally change the way the doll looks in barefoot photos. It's worth knowing about if you're planning to photograph the doll barefoot and you care about exact proportions, though this is a subtle effect and ordinarily invisible in shoes. Non-standing feet lack the bolts and thus this effect, leaving the feet a little shorter and more natural-looking.

What Standing Feet Open Up
Most buyers should find standing feet worth the extra cost; they open up posing, display, storage, and shower options that non-standing feet don't. That's the bottom line. Purchasers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. Everyone else is better off with standing feet, one of the simplest upgrades to justify. More info at this Your Ultimate Guide to Modern Sex Dolls- What Nobody Tells You e284ed0 which is worth considering with A Brutally Honest Primer on Modern Sex Dolls- Start Here and An Honest Look at Sex Dolls Right Now- What to Expect. Also check out view it for more.
[center][/center]

[center][size=large]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/size][/center]